Hello all here is my 870

12GAfun · Post by **12GAfun** » Sat Mar 29, 2014 11:29 am

ATI Talon stock and Scorpion grip
GG&G follower
NON-MIM extractor
Tacstar side saddle 6-shot
Remington 2 shot extension
Fab defense Forend with 3 rails mounts
Acid tactical flashlight and mount with 3 settings ( strobe, high beam and low beam )
CAA commander arms forend grip
here is also some pics of what it looked like when I bought it.

Odyknuck · Post by **Odyknuck** » Sun Mar 30, 2014 12:36 pm

Very Nice!

Zebra62 · Post by **Zebra62** » Sun Mar 30, 2014 1:22 pm

Like the way you have your rig tricked out 12GAfun. Welcome to the forum.

Banshee · Post by **Banshee** » Sun Mar 30, 2014 3:15 pm

I would be careful with the vertical fore-grip on a pump gun. I have seen them twist the actuating arms to the point they jammed up.

12GAfun · Post by **12GAfun** » Mon Mar 31, 2014 4:32 am

Banshee wrote:I would be careful with the vertical fore-grip on a pump gun. I have seen them twist the actuating arms to the point they jammed up.

Really, I thought about that. Since I was a kid and shot shotguns I always had my hand on the forend to load it. That CAA grip is kinda long for it. I want to get a rail cover for the bottom rail but not sure which ones will fit and hold up to loading the shotgun. I was also thinking about a short grip like a Magpul AFG angled forend grip. Also not sure it will fit my rail. What other forend grip would you recommend.

12GAfun · Post by **12GAfun** » Mon Mar 31, 2014 4:33 am

Odyknuck wrote:Very Nice!

THANKS

12GAfun · Post by **12GAfun** » Mon Mar 31, 2014 4:34 am

Zebra62 wrote:Like the way you have your rig tricked out 12GAfun. Welcome to the forum.

THANKS

I agree with the quotes

Zebra62 · Post by **Zebra62** » Mon Mar 31, 2014 11:23 am

12GAfun wrote:
Banshee wrote:I would be careful with the vertical fore-grip on a pump gun. I have seen them twist the actuating arms to the point they jammed up.

Really, I thought about that. Since I was a kid and shot shotguns I always had my hand on the forend to load it. That CAA grip is kinda long for it. I want to get a rail cover for the bottom rail but not sure which ones will fit and hold up to loading the shotgun. I was also thinking about a short grip like a Magpul AFG angled forend grip. Also not sure it will fit my rail. What other forend grip would you recommend.

Since you have the ATI stock on yours, you may have already seen these:
http://www.atigunstocks.com/forends-and ... orend.html
http://www.atigunstocks.com/forends-and ... orend.html

When I can get a few more dollars scraped together I am going to get the Akita stock and the Tactical forend for mine. Should look pretty good after that.

12GAfun · Post by **12GAfun** » Mon Mar 31, 2014 6:32 pm

Zebra62 wrote:
12GAfun wrote:
Banshee wrote:I would be careful with the vertical fore-grip on a pump gun. I have seen them twist the actuating arms to the point they jammed up.

Really, I thought about that. Since I was a kid and shot shotguns I always had my hand on the forend to load it. That CAA grip is kinda long for it. I want to get a rail cover for the bottom rail but not sure which ones will fit and hold up to loading the shotgun. I was also thinking about a short grip like a Magpul AFG angled forend grip. Also not sure it will fit my rail. What other forend grip would you recommend.
Since you have the ATI stock on yours, you may have already seen these:
http://www.atigunstocks.com/forends-and ... orend.html
http://www.atigunstocks.com/forends-and ... orend.html

When I can get a few more dollars scraped together I am going to get the Akita stock and the Tactical forend for mine. Should look pretty good after that.

I had that one Talon 5 side forend and if you had to shoot it bare handed and it was cold out your hand was hurting. That aluminum would tear up your hands with every shot did not like it at all, did think about checking out that other one, but really like the Magpul forend for the 870
Thanks for the advice any way

12GAfun · Post by **12GAfun** » Mon Mar 31, 2014 6:34 pm

I took off that Mako group forend and decided to order me a magpul MOE 870 forend I think for what other purpose I want to try to use this shotgun for (hunting) that magpul forend will work so much better

Remington 870 Forum - Rem870.com/Forum

Hello all here is my 870

Hello all here is my 870

Re: Hello all here is my 870

Re: Hello all here is my 870

Re: Hello all here is my 870

Re: Hello all here is my 870

Re: Hello all here is my 870

Re: Hello all here is my 870

Re: Hello all here is my 870

Re: Hello all here is my 870

Re: Hello all here is my 870