Cheesehead in Central Valley CA

Welcome to the forum! Please introduce yourself.
Post Reply
JLang
Newbie
Posts: 2
Joined: Wed Oct 30, 2013 3:09 am

Cheesehead in Central Valley CA

Post by JLang »

Hey I'm a Northern Wisconin Navy guy stationed in California's central valley. I have been shootin since I was 7. I'm a huge fan of the 870. I own 2, a beautiful Wingmaster 12 ga. that shoots flawlessly and this spring I picked up a brand new express that has had some trouble extracting shells. I have been tinkerin around with that express, I put a remington shurshot stock and forend on her and an 18in police barrel to make a sturdy home defense gun for the wife while Im at sea, that I can switch to the 26" vent rib on weekends to blow holes in the sky.
User avatar
Gunny
Enthusiast Shotgunner
Posts: 36
Joined: Tue Oct 22, 2013 5:50 am
Location: Ozark Mtns, AR

Re: Cheesehead in Central Valley CA

Post by Gunny »

Welcome to the forum JLang, and Thank you for your Service ....
Image

" Live a good, honourable life. Then when you get older and think back, you'll enjoy it a second time."
User avatar
Synchronizor
Elite Shotgunner
Posts: 3022
Joined: Fri Dec 28, 2012 8:04 am
Location: The Inland Northwest
Contact:

Re: Cheesehead in Central Valley CA

Post by Synchronizor »

Welcome to the forum.

A lot of people have issues with shells sticking in the chambers of new 870s. Normally this is due to the poor quality of cheap steel-based bulk-pack shotshells. The 870 isn't a picky eater, but when the chamber is brand-new and not broken in yet (or hasn't even had the factory grease cleaned out), these bottom-end shells can be difficult to extract. Expresses are rougher out of the box than higher-end 870s, but once you get the gun broken in it should work much better, even with cheap ammo (though there are still some brands - like the Winchester Universals - that are best to avoid with any shotgun).
Post Reply