Factory Mag Extension COLOR MATCH

Discuss all accessories and upgrades available for the Remington 870 shotgun: stocks, forends, barrels, chokes, magazine extensions, followers, safeties, sights etc.
Post Reply
rustyshackelford
Newbie
Posts: 4
Joined: Wed Nov 19, 2014 7:12 pm

Factory Mag Extension COLOR MATCH

Post by rustyshackelford »

Greetings and welcome to my first post. I recently purchased an 870P from 1994 that was a police dept turn in. The shotgun is in almost new condition and I couldn't be happier.... EXCEPT.... I'd like to get a mag extension for my new shotgun. Thus begins my journey of disappointment.
I bought a factory mag extension that supposedly would match my shotgun because it is the "parkerized" version. The extension was a very poor color match as you can see in the picture.
Image

So my question for you all, how can I find a matching factory extension for my 1994 870 Police Magnum? It has the 20'' barrel so I would love the +3 20'' extension. Is it possible?
User avatar
Synchronizor
Elite Shotgunner
Posts: 3022
Joined: Fri Dec 28, 2012 8:04 am
Location: The Inland Northwest
Contact:

Re: Factory Mag Extension COLOR MATCH

Post by Synchronizor »

Remington offers +3 extension parts with Parkerized, Express matte oxide, and Wingmaster polished blued finishes. I have a Parkerized +3 tube, and it's dark-colored just like the +2 in your picture.

The tricky thing with Parkerizing is that the color can vary quite a bit depending on the exact finishing process. Your gun may be old enough that it was finished differently, or perhaps the gun was refinished at some point by a 3rd party using a different process (my money's on the latter, personally). Either way, it doesn't look like you're going to get an exact color match out of any factory extension kit. Perhaps you could paint the extension to get its appearance closer.

By the way, if you weren't aware, all you need to have a +3 extension is a +3 extension tube, since your current +2 kit has the same coupling, spring, and clamp you'd get in a full +3 kit.
rustyshackelford
Newbie
Posts: 4
Joined: Wed Nov 19, 2014 7:12 pm

Re: Factory Mag Extension COLOR MATCH

Post by rustyshackelford »

Definitely factory finish. The parkerization process has changed over the years.
badboybeeson
Moderator of the S&J Hardware Forum
Posts: 186
Joined: Sun Jan 22, 2012 11:20 pm

Re: Factory Mag Extension COLOR MATCH

Post by badboybeeson »

simple
your gun is zinc phosphate
the mag tube is maganese phosphate finished
rustyshackelford
Newbie
Posts: 4
Joined: Wed Nov 19, 2014 7:12 pm

Re: Factory Mag Extension COLOR MATCH

Post by rustyshackelford »

badboybeeson wrote:simple
your gun is zinc phosphate
the mag tube is maganese phosphate finished
Ok thanks for your reply but that doesn't answer the question. Is there hope for me to find an extension that matches my shotgun?
User avatar
Synchronizor
Elite Shotgunner
Posts: 3022
Joined: Fri Dec 28, 2012 8:04 am
Location: The Inland Northwest
Contact:

Re: Factory Mag Extension COLOR MATCH

Post by Synchronizor »

You're probably out of luck if you want to buy new. The factory Parkerizing on current-production factory +3 extension kits is exactly the same as the Parkerizing on the +2s. If your gun is wearing an old factory finish, you might be able to find an older used extension kit that matches. Otherwise, if a color match is that important to you, you'll probably have to refinish the extension, the gun, or both.
Post Reply