Do you like to hunt turkeys or other types of fowl? If so, then try to add the Dead Ringer Beard Buster Sight to your shotgun. This sight attachment will make it easier to see your target in dark or dim environments. This is a circular sight that gets attached to the rear and high front sight which replaces the factory sight of the shotgun. The front sight is designed to be universal since it can fit vent rib shotguns that are 3/8, 1/4, or 5/16. The Beard Buster is compatible with almost all the popular shotgun brands, including Remington, Beretta, Winchester, Ruger, Mossberg, Weatherby, and more.
Accessories
Telescoping Magazine Extension Tube for Shotguns
If you think that all shotgun magazine extension tubes are the same with just a small differences then this review will surprise you! ;)
TRUGLO TFO Tactical Universal Shotgun Front Sight
Tritium sights are bright during the nigh but not during the day. Fiber optic (light gathering) sights are very bright during the day but canno be seen in the night.
TruGlo Company made sight which combines both fiber optic and Tritium elements. Very interesting sight for tactical or home defense shotguns.
2 Best Recoil Pads for Remington 870: Supercell and Limbsaver
New shotgunners don’t like the heavy recoil of the 12 gauge Remington 870. This is understandable because nobody likes coming home with black and blue shoulder. You will get used to the recoil with time and ammo spent but there is inexpensive solution to make life of new Remington 870 shotgun owners easier.
Standard Remington 870 buttpad is a hard rubber recoil pad which works well but can be replaced with one of the aftermarket recoil pads. Let’s talk about the available replacement buttpads and find the best one.
Double Star ACE Remington 870/Mossberg 500/590 Receiver Block to install AR-15 ARFX Skeleton Stock
Double Star ACE AR-15 ARFX Skeleton Stock is a very popular upgrade for AR-15 rifles. And now you can install it on your favorite Remington 870 shotgun!
Remington 870 in Afghanistan and Around the World
More interesting photos from Afghanistan. Soldier with Remington 870
Remington 870 with Knight’s Armament RAS used by Canadian Forces in Afghanistan
Interesting photo from Afghanistan. Knight’s Armament RAS on Remington 870:
Remington 870 Conventional Mark 5 Stock Review
The Remington 870 shotguns are good for competitive shooting, home defense and hunting purposes. However, you might not like the factory stock which comes with each shotgun model. Depending on the size of your body, you might not like the length of pull on the factory stock. Instead, you will need a stock that lets you adjust the length of pull and allows you to shoot more comfortably and accurately. If you have standard stock then you can get Remington Length of Pull Spacer Kit to make it longer but not shorter.
Thanks to Choate Machine & Tool for the stock for review. Choate Machine & Tool is one of the oldest companies which manufactures lots of different parts and upgrades for firearms. Remington 870 owners may know the company for the magazine extensions they produce.
This article is about another Choate stock for Remington 870. You can read previous articles using following links:
Remington 870 Telescoping Stock from Choate
Choate Remington 870/Mossberg 500 Mark 6 Stock Review
Choate Remington 870 MK5 Pistol Grip Stock and Forend Review
Remington Shotguns 870, 11-87, 1100 Trigger Spring Kit
If you own a Remington 870, Remington 11-87, or Remington 1100, and you want better accuracy when shooting slugs, then you will want to upgrade your weapon’s factory sear spring with the lighter spring. You can read about Remington factory sear springs available in previous review: Remington 870 Sear Springs (Light Pull, Standard, Police (Heavy))
Remington 1100 Shotgun Review, Top 8 Upgrades and Accessories
Remington has made gas-operated shotguns since the 1950s. Their very first one manufactured was the Model 58 semi-automatic shotgun. This shotgun line enjoyed a fair amount of success between 1956 and 1963. But then, they built a better gas-operated shotgun which reduced recoil a lot more. This model was called the Remington Model 1100. It was first introduced in 1963 and has been manufactured ever since. The three most common gauges manufactured for this shotgun are the 12-gauge, 28-gauge, .410 bore and 20-gauge.
Blackhawk Knoxx SpecOps Stock Gen III for Remington 870 – Review
The Blackhawk Knoxx SpecOps Gen III is a premium stock upgrade for the Remington 870 shotgun that you don’t want to miss. If you’re new to shotguns and still using the factory stock that came with your Remington 870, then you know how the recoil feels each time you fire. With the Knoxx SpecOps Stock Gen III, this recoil you would normally feel will be reduced a lot.
The previous SpecOps generation stock was discontinued.
Knoxx SpecOps Stock Gen III for Remington 870
The biggest difference from the previous generation of this stock is a huge buttpad which also reduces recoil. And felt recoil is much softer. You don’t feel hit you just feel like shotgun springs to the rear and back. This is thanks to what is referred to as the “2-stage recoil reduction system” that has been implemented into the stock. Not only will you experience very little muzzle rise during operation, but you won’t have to deal with any annoying cheek-slapping problem either. Instead, you can just focus completely on your accuracy with each shot and improve your confidence after you experience the results. As you may know, cheek-slap was one of the common problems of the previous generations of the SpecOps stock.
I have tested Blackhawk Knoxx SpecOps Gen III on the range with variety of shotgun ammo and recoil was always nice and soft:
When I was shooting Mini Magnum and Magnum the shotgun was jumping in my hands but my shoulder didn’t feel much of the recoil. Slow motion shows that it is better to adjust the stock to make it a little longer.
Knoxx SpecOps Stock Gen III for Remington 870 – Spring
The Knoxx SpecOps Stock Gen III is suitable for both tall shooters and short shooters alike. Thanks to the 6 various adjustable positions and enhanced ergonomics, this stock can be handled by someone of virtually any height and physique. You can adjust the length of pull from 12.5 inches to up to 15.2 inches. As for gripping the weapon, the stock features a pistol grip which will allow you to hold the weapon firmly in dangerous tactical situations. You can even hold your shotgun with one hand by using this pistol grip if you wanted to. That way, you can use your other hand for reloading the weapon or whatever else you need to do in a situation where time is of the essence.
Knoxx SpecOps Stock Gen III for Remington 870 – Stock
In addition to the stock, you will receive a matching forend with a handstop for extra gripping ability. There is also a Picatinny-like mount for adding accessories to the stock too. You can install flashlight, laser etc.
Quick detach sling swivel comes with the stock. You can install it on left or one the right side of the stock. This will enable you to have a sling to help you carry your shotgun more conveniently if you’re walking a long distance with it.
Knoxx SpecOps Stock Gen III for Remington 870 – Forend
The cost of the Knoxx SpecOps Stock Gen III is $119.99. For that, you’re getting a stock made of a durable and lightweight polymer that was built to offer recoil reduction to the user. If you frequently use your Remington 870, especially in tactical situations, then you cannot afford to go without a premium stock upgrade like this.
Knoxx SpecOps Stock Gen III Installation
Installation of the Gen III stock is little trickier than installation of the previous generation but still very fast and simple. It took me less than 10 minutes to install the stock and forend. Just follow the simple instructions that are included with the stock and you should be all set.
Knoxx SpecOps Stock Gen III Frequently Asked Questions
Proper Eye Relief is Important
How the Knoxx SpecOps Works
Use of Oversized Safeties and additional accessories on Remington 870 with Knoxx Stock
Manufacturer of the SpecOps stock does not recommend using any of the oversized safety buttons. This is because big safety buttons stick up and when shotgun moves rearward the button will hit the stock and damage it and even may cause injury.
Here’s what happens when you try using Blackhawk Specops stock with oversized safety:
Also, you need to make sure that sidesaddle will not interfere with the stock movement.
Spacer Between Receiver and Stock on Remington 870
Some people don’t read installation instructions carefully or just forget to remove the metal spacer which is needed for the factory stock. Remember that you need to remove it installing the Knoxx SpecOps stock or otherwise you will have a gap between stock and receiver.
Does it Reduce 95% of Recoil?
In my opinion – no, it doesn’t reduce that much recoil BUT it reduces recoil significantly and I highly recommend it.
Recommended Product:
 Blackhawk! SpecOps Knoxx Recoil-Reducing Stock |
Get Blackhawk! SpecOps Knoxx Recoil-Reducing Stock on Cabela’s |
Related post:
5 Best Aftermarket Stocks for Remington 870
Knoxx Stock and IPSC
I have seen a lot of discussions about the use of the Knoxx recoil suppression stock in IPSC competitions. Some shooters believe that it is prohibited under this rule:
22. External modifications such as weights, or devices to control or reduce recoil are specifically not allowed, except for recoil pads fitted to the rear face of the stock of the shotgun.
Other think that it can be installed because it is not an “external modification”.
I decided to contact the IPSC at the rules@ipsc.org to find the answer. I was very pleased to receive answer from Neil Beverley, IPSC Shotgun Director. And now I want to share the truth about use of the Knoxx stock in IPSC.
“Knoxx recoil suppression stocks can be fitted as a direct replacement of an existing stock under Point 23 of the division rules.”
“Point 22 of the rules prevents any additional weights from being added externally to a stock.”
Also, Neil sent links to the IPSC Global Village where you can find more information.
So, the short answer is Knoxx recoil suppression stocks CAN be used in IPSC.
DISCONTINUED – Blackhawk Knoxx PowerPak Modular Cheek Piece System
What is Blackhawk Knoxx PowerPak Modular Cheek Piece System?
I haven’t seen many Blackhawk Knoxx PowerPak reviews on the web. I have read one very negative review and several positive ones. That is why I want to share my experience with you.
It is modular cheek piece with ammo holder and watertight storage compartment. It can be installed on Knoxx SpecOps Stock.
Blackhawk Knoxx PowerPak Modular Cheek Piece
My brother is owner of the Fabarm SAT 8 Pro Telescopic. This shotgun has Knoxx stock, which can be installed on Remington 870. That is why Blackhawk Knoxx PowerPak can be installed on both Fabarm and Remington 870. Recently my brother installed Blackhawk Knoxx PowerPak on his shotgun.
Installation
Installation of the Knoxx Powerpack is not difficult and takes just 15-20 minutes. The only one problem is that screws are very small. But when it’s ready it is easy to snap cheek on the stock.
Knoxx Powerpak Modular Cheek
Construction
This cheek looks good, shells are hold reliably in place.
Advantages
I think that Knoxx Powerpak is a good alternative to the receiver mount shell holders. High cheek will be useful for people which have holographic sight/scope installed. I am not sure what can you do with a watertight storage compartment but instruction says that it can be used to store earplugs and spare batteries there.
Blackhawk Knoxx Powerpak
Blackhawk Powerpak
Related Post:
10 Steps to Upgrade Your Remington 870 Express to Police Version
10 Must Have Upgrades for Your Remington 870 Shotgun
Magazine Extensions for Remington 870 Shotgun (Nordic Components, Choate, TacStar, Remington, ATI)