Color fill lower ar

[alpha15]

Some color fill I did on an Anderson lower

Sent from my SCH-I545 using Tapatalk

[Scorpion8]

Nice work. Is that just those fill sticks sold by Brownells, or did you use something else? I've used those highlight/fill-sticks to bring out serial numbers at times and such, but they don't seem permanent even after hardening.

[alpha15]

Nice work. Is that just those fill sticks sold by Brownells, or did you use something else? I've used those highlight/fill-sticks to bring out serial numbers at times and such, but they don't seem permanent even after hardening.

Tooth pick and testors paint.

Sent from my SCH-I545 using Tapatalk

[Scorpion8]

Came out nice. Are you going to clear coat or wax over it? Wondering if it will chip/flake out under recoil?

[alpha15]

Came out nice. Are you going to clear coat or wax over it? Wondering if it will chip/flake out under recoil?

If I recall correctly I did put a little clear over it.

Seeing as how I degreased well with alcohol and used a heat gun to dry it and added about 3 or four coats using non acetone nail polish remover each time I think it really didn't need the clear coat.

Sent from my SCH-I545 using Tapatalk

[Scorpion8]

....I think it really didn't need the clear coat.

Great. Would like to hear your experiences with how it wears and holds up after a bunch of range use.

[alpha15]

....I think it really didn't need the clear coat.

Great. Would like to hear your experiences with how it wears and holds up after a bunch of range use.

I've shot it numerous times since doing it. No issues as of yet.

Plus it's a 7.62x39 ar so it's got more recoil than the .556

Sent from my SCH-I545 using Tapatalk

[Scorpion8]

Plus it's a 7.62x39 ar so it's got more recoil than the .556

Should get a good workout then.