Repair
Repair
I bought my son a 870 that worked great for the first year then had issues with it not ejecting shell out. I got it appart and finaly got the ejecter out but the plunger is stuck. I had trouble getting it to push in like the vidio showed. How do i get it out. Can i get a new assembly if i cant? Its soaking in oil now with hopes that the oil will help free it. My guess is the spring is bad
-
Synchronizor
- Elite Shotgunner
- Posts: 3022
- Joined: Fri Dec 28, 2012 8:04 am
- Location: The Inland Northwest
- Contact:
Re: Repair
Are you talking about the extractor & extractor plunger?
The plunger sometimes sticks in its little channel, but not usually that badly unless it's an older gun that's really been neglected. Just thumping the bolt down-ward against a non-marring surface like a wood-topped workbench will usually make the plunger and spring fall out without too much trouble.
The plunger sometimes sticks in its little channel, but not usually that badly unless it's an older gun that's really been neglected. Just thumping the bolt down-ward against a non-marring surface like a wood-topped workbench will usually make the plunger and spring fall out without too much trouble.