How can I slick up my action
Sent from my iPhone using Tapatalk
870 action
-
Chief Brody
- Senior Shotgunner
- Posts: 223
- Joined: Fri Jul 27, 2012 4:19 am
- Location: Long Island, NY
Re: 870 action
1. Lots and lots of shooting.
2. Repeat Step 1.
2. Repeat Step 1.
Let us speak courteously, deal fairly, and keep ourselves armed and ready. - T.R.
-
TexasArmor84
- Senior Shotgunner
- Posts: 297
- Joined: Tue Dec 10, 2013 7:52 pm
870 action
I've read that, but is there any polishing/cleaning that will speed the process
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
Synchronizor
- Elite Shotgunner
- Posts: 3022
- Joined: Fri Dec 28, 2012 8:04 am
- Location: The Inland Northwest
- Contact:
Re: 870 action
Like Chief Brody said, shoot the gun. A lot. Cycling it at home also moves the parts around and can help wear rough spots down.
Also, overly-heavy springs can stiffen up an 870 by increasing friction in the system. It's not a huge difference, but on a gun that's otherwise run-in, it's noticeable.
Cleaning? Sure, keep dirt and grit out of your receiver, and things'll move easier. As for polishing, plenty of folks have taken a buffing wheel to their action bars and other moving parts, but I really think the best way to go is to just let the gun break itself in through normal use. That'll wear down any rough spots that are actually dragging on each other, while not stripping the finish or surface hardening off anything that isn't interfering.
Also, overly-heavy springs can stiffen up an 870 by increasing friction in the system. It's not a huge difference, but on a gun that's otherwise run-in, it's noticeable.
Cleaning? Sure, keep dirt and grit out of your receiver, and things'll move easier. As for polishing, plenty of folks have taken a buffing wheel to their action bars and other moving parts, but I really think the best way to go is to just let the gun break itself in through normal use. That'll wear down any rough spots that are actually dragging on each other, while not stripping the finish or surface hardening off anything that isn't interfering.