Magazine Extensions for Remington 870

Discuss all accessories and upgrades available for the Remington 870 shotgun: stocks, forends, barrels, chokes, magazine extensions, followers, safeties, sights etc.
Post Reply
teo2000
New Shotgunner
Posts: 13
Joined: Tue Apr 10, 2012 6:50 pm

Re: Magazine Extensions for Remington 870

Post by teo2000 »

Allow me to add to the "Dimple curing Methods".

Dimple curing. I NEVER drill / file or in any way damage the extension tube to remove dimples. I always pop them out using a method described in the next video. It works perfectly.

http://www.youtube.com/watch?v=m-ztzICm5lg
marksman1941
Newbie
Posts: 1
Joined: Mon May 28, 2012 6:31 pm

Re: Magazine Extensions for Remington 870

Post by marksman1941 »

Hey all. I'm new here, but not to 870's. I've had one for several years that was used primarily as a turkey gun and for occaisonal trap shooting, but lately our IDPA group has started doing defensive shotgun. I have a newer 870 Express Magnum with the 27 inch barrel, and wanted to get a mag extension and possibly shorter barrel. As it is, mine only holds 4x of 2 3/4 inch shells. I've read through here a bit and saw a lot about Nordic Components, but most people seem to have 18.5 inch barrels and the like. What would be the largest extension I can fit under my 27in barrel without sticking out? And if I were to downsize in barrels, what length/brand is a good route to go? Thanks for the hep.
Chief Brody
Senior Shotgunner
Posts: 223
Joined: Fri Jul 27, 2012 4:19 am
Location: Long Island, NY

Re: Magazine Extensions for Remington 870

Post by Chief Brody »

First post, new owner of a new 870 Police Magnum.
Quick question about the Remington 2-shot extension...
I've seen lots of pictures of various 870's with this extension and sometimes the end of the mag tube is flush with the muzzle, sometimes it's a little bit longer. My 870P has an 18" barrel, will that 2-shot extension go past that? Just an aesthetic thing, but if the tube is longer than the barrel, that's a deal-breaker for me. If it'll end up flush with the barrel, I'll stick with the factory Remington part.
Thanks a lot,
Steve

PS: Great forum, happy to be a part of it, and excited to be a new gun owner. Went ahead and bought/downloaded the Rem870 Guide, great stuff.
Let us speak courteously, deal fairly, and keep ourselves armed and ready. - T.R.
ioan1ioan
New Shotgunner
Posts: 7
Joined: Tue Oct 09, 2012 5:29 am

Re: Magazine Extensions for Remington 870

Post by ioan1ioan »

Hi guys,
i own a rem 870 28'' barrel. I want to have 11+1 capacity. Can i buy and install the nordic +7
mag extension tube or it will be much longer than the barrel?
User avatar
Vitaly
Owner
Posts: 1274
Joined: Tue Jan 03, 2012 11:27 am

Re: Magazine Extensions for Remington 870

Post by Vitaly »

ioan1ioan wrote:Hi guys,
i own a rem 870 28'' barrel. I want to have 11+1 capacity. Can i buy and install the nordic +7
mag extension tube or it will be much longer than the barrel?
I have found info that length of Nordic +7 Extension for Remington 870 is 17.24". Now you can check if it will be much longer than the barrel.
http://www.Rem870.com - Blog about the Remington 870 Shotgun
Kentactic
Senior Shotgunner
Posts: 266
Joined: Fri Sep 28, 2012 5:06 pm

Re: Magazine Extensions for Remington 870

Post by Kentactic »

Chief Brody wrote:First post, new owner of a new 870 Police Magnum.
Quick question about the Remington 2-shot extension...
I've seen lots of pictures of various 870's with this extension and sometimes the end of the mag tube is flush with the muzzle, sometimes it's a little bit longer. My 870P has an 18" barrel, will that 2-shot extension go past that? Just an aesthetic thing, but if the tube is longer than the barrel, that's a deal-breaker for me. If it'll end up flush with the barrel, I'll stick with the factory Remington part.
Thanks a lot,
Steve

PS: Great forum, happy to be a part of it, and excited to be a new gun owner. Went ahead and bought/downloaded the Rem870 Guide, great stuff.
+2 factory extension on an 18'' barrel should remain flush.
Chief Brody
Senior Shotgunner
Posts: 223
Joined: Fri Jul 27, 2012 4:19 am
Location: Long Island, NY

Re: Magazine Extensions for Remington 870

Post by Chief Brody »

Yep, thanks Kentactic.
Went ahead with the Rem +2 extension a while back, very happy with it. There's pictures of it around here somewhere.
Let us speak courteously, deal fairly, and keep ourselves armed and ready. - T.R.
ioan1ioan
New Shotgunner
Posts: 7
Joined: Tue Oct 09, 2012 5:29 am

Re: Magazine Extensions for Remington 870

Post by ioan1ioan »

Vitaly wrote:
ioan1ioan wrote:Hi guys,
i own a rem 870 28'' barrel. I want to have 11+1 capacity. Can i buy and install the nordic +7
mag extension tube or it will be much longer than the barrel?
I have found info that length of Nordic +7 Extension for Remington 870 is 17.24". Now you can check if it will be much longer than the barrel.

It's about 2'' longer. Do you think i will have problem?
User avatar
Vitaly
Owner
Posts: 1274
Joined: Tue Jan 03, 2012 11:27 am

Re: Magazine Extensions for Remington 870

Post by Vitaly »

ioan1ioan wrote:
Vitaly wrote:
ioan1ioan wrote:Hi guys,
i own a rem 870 28'' barrel. I want to have 11+1 capacity. Can i buy and install the nordic +7
mag extension tube or it will be much longer than the barrel?
I have found info that length of Nordic +7 Extension for Remington 870 is 17.24". Now you can check if it will be much longer than the barrel.

It's about 2'' longer. Do you think i will have problem?
No, it's not a problem. Most competitive shooters have extension which is longer than the barrel:
Image

You will have to clean the extension from lead residue after shooting but other than that - everything is ok.
http://www.Rem870.com - Blog about the Remington 870 Shotgun
Roost426
Newbie
Posts: 2
Joined: Wed Oct 17, 2012 7:31 am

Re: Magazine Extensions for Remington 870

Post by Roost426 »

Hey all proud new owner of an 870 express that I purchased used, it has a 20 inch barrel with rifle sights. Checked in the tube and someone has already taken care of drilling out the dimples. After some research here it seems the Nordic Components Mag extension is the one to have. Anyone have any luck on finding them in stock anywhere online? Been searching for the 3 rounder and having no luck at all seems they are backordered/out of stock everywhere. :|
Post Reply