Magazine Extensions for Remington 870

TexasArmor84 · Post by **TexasArmor84** » Mon Dec 23, 2013 11:21 pm

I have a rachet cap and this is what it looks with it off

TexasArmor84 · Post by **TexasArmor84** » Mon Dec 23, 2013 11:22 pm

TexasArmor84 wrote:I have a rachet cap and this is what it looks with it off

Website · Post by **Synchronizor** » Sat Dec 28, 2013 9:04 am

Sorry this took a bit, I'm visiting family and working off a borrowed computer.

Is there a spring-loaded detent in the barrel guide ring? If not, you'll probably want to add a clamp to keep the extension secure.

TexasArmor84 · Post by **TexasArmor84** » Mon Dec 30, 2013 1:03 am

? Your gonna have to be a little more specific thanks

Kentactic · Post by **Kentactic** » Mon Dec 30, 2013 1:39 am

TexasArmor84 wrote:? Your gonna have to be a little more specific thanks

The ring that goes from the barrel to the magazine tube may or may not have a small detent ball right below the barrel. It is what keeps the non racheting style cap from loosening.

http://img406.imageshack.us/img406/7030 ... ystema.jpg

http://4.bp.blogspot.com/-QYqtZpwT-oc/T ... G_2989.JPG

http://www.brownells.com/userdocs/skus/ ... 0160_1.jpg

TexasArmor84 · Post by **TexasArmor84** » Mon Dec 30, 2013 2:39 am

Ok thanks going to take a look at it soon

baggedcobra · Post by **baggedcobra** » Mon Dec 30, 2013 2:32 pm

I just bought the Sage +2 extension. Should have it this week.

TexasArmor84 · Post by **TexasArmor84** » Tue Dec 31, 2013 2:45 am

Kentactic wrote:
TexasArmor84 wrote:? Your gonna have to be a little more specific thanks
The ring that goes from the barrel to the magazine tube may or may not have a small detent ball right below the barrel. It is what keeps the non racheting style cap from loosening.

http://img406.imageshack.us/img406/7030 ... ystema.jpg

http://4.bp.blogspot.com/-QYqtZpwT-oc/T ... G_2989.JPG

http://www.brownells.com/userdocs/skus/ ... 0160_1.jpg

It doesn't have the detent ball

Toetagger · Post by **Toetagger** » Tue Jan 14, 2014 7:25 pm

I watched a YouTube video on installing the extension tube. It said you had to dremel the stock plug stops so the shells won't hang up on them. Is this necessary. If so it seems I would be unable to go back to the stock configuration of I wanted to go hunting. Can anyone shed some light on this for me? Thanks.

Sent from my SCH-I545 using Tapatalk

TexasArmor84 · Post by **TexasArmor84** » Tue Jan 14, 2014 8:29 pm

Brownells sells a detent tool which allows you to push the detents flush with the barrel allowing no hang ups and you can push in your detents if need them back http://youtu.be/m-ztzICm5lg

Remington 870 Forum - Rem870.com/Forum