help barrel ID

[Abureels4me]

I have a Wingmaster barrel that is unmarked as to maker or chamber size. The rib is also different than any of my other Rems.. It is 30" and takes RemChokes.

[Scorpion8]

That's an interesting rib, and looks like a custom job. First off I would call Remington customer service with your receiver serial number and they can tell you if the Wingmaster was a special custom shop order, and when it was produced. Almost all Wingmasters were made for 3" and 2-3//4" shells, so you should be safe there, although you could try just racking a 3-1/2" shell thru the system to see if it functions. Check the chamber depth also. Remington may be able to tell you more about the barrel also.

[BKinzey]

I can't identify that barrel for you but I can say I have the REP in the oval stamp on at least 2 of my Remington barrels. Interestingly the stamps are on the exposed portion of the barrel where you can see it without disassembly.

[Abureels4me]

I bought the barrel at a gun show a few weeks ago. It is the best shooting barrel I've ever had on a shotgun.

[Romulus]

Maybe the markings were polished off by previous owner(s)/gunsmiths...I see a few telltale signs of overpolishing: rounded edges, dishing, etc...