Pictures of your Remington 870 Shotgun

General discussion about Remington 870 shotgun.
Chilly
Experienced Shotgunner
Posts: 69
Joined: Thu Jan 31, 2019 12:49 am

Re: Pictures of your Remington 870 Shotgun

Post by Chilly » Tue Feb 19, 2019 11:02 pm

Forearms.
1550617336515-211081865.jpg
1550617336515-211081865.jpg (726.98 KiB) Viewed 665 times

Germansheperd
Valued Shotgunner
Posts: 126
Joined: Sat Nov 24, 2018 2:42 pm

Re: Pictures of your Remington 870 Shotgun

Post by Germansheperd » Wed Feb 20, 2019 1:15 am

Nice i see a lot of potential there

Chilly
Experienced Shotgunner
Posts: 69
Joined: Thu Jan 31, 2019 12:49 am

Re: Pictures of your Remington 870 Shotgun

Post by Chilly » Mon Mar 04, 2019 11:54 pm

This past weekend's gunshow find. Yes, I loopholed.
1551560756404-994703343.jpg
1551560756404-994703343.jpg (701.86 KiB) Viewed 604 times
IMG951968.jpg
IMG951968.jpg (226.73 KiB) Viewed 604 times
IMG951967.jpg
IMG951967.jpg (150.97 KiB) Viewed 604 times
Not original trap barrel, and the barrel was cut (so cyl bore), and receiver bluing is very thin, and worst of all the buttstock is chipped around the receiver. So sad. But thats why I got it really cheap. Its an 870TX.

USMA-1982
Experienced Shotgunner
Posts: 59
Joined: Fri Aug 03, 2018 5:09 pm

Re: Pictures of your Remington 870 Shotgun

Post by USMA-1982 » Tue Mar 05, 2019 1:53 am

Beautiful wood, even chipped. Is the stock bearing plate missing?

Chilly
Experienced Shotgunner
Posts: 69
Joined: Thu Jan 31, 2019 12:49 am

Re: Pictures of your Remington 870 Shotgun

Post by Chilly » Tue Mar 05, 2019 11:42 am

It wasnt when I took it apart but could have happened previously. Even with the bearing plate installed the edge of the stock is all smooshed up onto the sharp edge of the receiver. Makes me wonder if someone converted pre-plate stock but took too much wood off the bearing surface, or a poor attempt to adjust cast by shaving the stock.

It'll still be a respectable trap stock once built up with epoxy, tinted brown, reshaped. I may keep it because the higher comb will probably be about perfect for slug barrel with irons. Or maybe I'll put a Trijicon RMR on top.

ccr refinishing
Newbie
Posts: 1
Joined: Sat Dec 09, 2017 2:36 pm

Re: Pictures of your Remington 870 Shotgun

Post by ccr refinishing » Wed Mar 06, 2019 11:32 pm

Image

This rem Tac 14 is done in our CPII plating ccrrefinishing.com

Boz Mon
Newbie
Posts: 4
Joined: Tue Jan 22, 2019 2:26 pm

Re: Pictures of your Remington 870 Shotgun

Post by Boz Mon » Sun Mar 10, 2019 9:21 pm

Image

Finished my 870 today with Boyd’s furniture. It’s a 20 ga. With the Nordic extended mag tube, non mim extractor, and the vang comp extended safety.


Sent from my iPad using Tapatalk

Germansheperd
Valued Shotgunner
Posts: 126
Joined: Sat Nov 24, 2018 2:42 pm

Re: Pictures of your Remington 870 Shotgun

Post by Germansheperd » Mon Mar 11, 2019 11:36 am

Boz Mon wrote:
Sun Mar 10, 2019 9:21 pm
Image

Finished my 870 today with Boyd’s furniture. It’s a 20 ga. With the Nordic extended mag tube, non mim extractor, and the vang comp extended safety.


Sent from my iPad using Tapatalk
How long is the barrel and how much is the magazine extension?

Boz Mon
Newbie
Posts: 4
Joined: Tue Jan 22, 2019 2:26 pm

Re: Pictures of your Remington 870 Shotgun

Post by Boz Mon » Mon Mar 11, 2019 2:04 pm

Germansheperd wrote:
Boz Mon wrote:
Sun Mar 10, 2019 9:21 pm
Image

Finished my 870 today with Boyd’s furniture. It’s a 20 ga. With the Nordic extended mag tube, non mim extractor, and the vang comp extended safety.


Sent from my iPad using Tapatalk
How long is the barrel and how much is the magazine extension?

It’s the factory barrel I’m not sure what the length is. And I think it’s the +6 extension. The gun now holds 10 +1 in the chamber.


Sent from my iPhone using Tapatalk

Germansheperd
Valued Shotgunner
Posts: 126
Joined: Sat Nov 24, 2018 2:42 pm

Re: Pictures of your Remington 870 Shotgun

Post by Germansheperd » Mon Mar 11, 2019 5:02 pm

Here is the HD 20ga I built
Attachments
9E1EF8F3-93A8-4640-A85D-CD90EAB62E65.jpeg
9E1EF8F3-93A8-4640-A85D-CD90EAB62E65.jpeg (1.01 MiB) Viewed 544 times
C9DAAB94-7A5E-4AF3-9D9A-51C1EC01D863.jpeg
C9DAAB94-7A5E-4AF3-9D9A-51C1EC01D863.jpeg (1.11 MiB) Viewed 544 times

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests