Looking into buying this 870 magnum owner says maybe 20 years old. Does anyone know what model it actually is wingmaster?
Sent from my iPhone using Tapatalk Pro
870 magnum
- TexasArmor84
- Senior Shotgunner
- Posts: 297
- Joined: Tue Dec 10, 2013 7:52 pm
870 magnum
Info givin Remington 870 Magnum 12 ga pump, 28" vented rib, shoots 2 3/4" or 3", includes full, mod & imp screw in chokes
Any idea of the age and value?
Sent from my iPhone using Tapatalk Pro
Any idea of the age and value?
Sent from my iPhone using Tapatalk Pro
- Synchronizor
- Elite Shotgunner
- Posts: 3022
- Joined: Fri Dec 28, 2012 8:04 am
- Location: The Inland Northwest
- Contact:
Re: 870 magnum
I would guess mid 1980s at the earliest, given the screw-in choke and what appear to be new-style action bars & shell carrier (hard to say for sure, though). I can't make out the serial number in the pictures. If you could provide that, it would give me a lot more to go on.
Also, might want to check on why the front pin is being held in with tape. Hopefully it's just something simple like a worn detent spring or a chipped carrier pivot tube.
Also, might want to check on why the front pin is being held in with tape. Hopefully it's just something simple like a worn detent spring or a chipped carrier pivot tube.
- TexasArmor84
- Senior Shotgunner
- Posts: 297
- Joined: Tue Dec 10, 2013 7:52 pm
870 magnum
I will acquire this firearm today. The pin is in there just loose so they put tape on it. I will post better pictures and send the VIN to you SYNC later today. From what I have researched today it’s either a 1986 model or 1987. Also seen that it good be a wingmasterSynchronizor wrote:I would guess mid 1980s at the earliest, given the screw-in choke and what appear to be new-style action bars & shell carrier (hard to say for sure, though). I can't make out the serial number in the pictures. If you could provide that, it would give me a lot more to go on.
Also, might want to check on why the front pin is being held in with tape. Hopefully it's just something simple like a worn detent spring or a chipped carrier pivot tube.
Sent from my iPhone using Tapatalk Pro
Re: 870 magnum
I think only the Wingmasters have the chrome bolt cover? Like the one pictured?
- TexasArmor84
- Senior Shotgunner
- Posts: 297
- Joined: Tue Dec 10, 2013 7:52 pm
870 magnum
That’s what I was thinking the parts and finish are all there just not the stampSidney wrote:It's a Wingmaster, all firearms have a date code on the barrel (month and year) where as the serial only tells the year for Remington firearms.
Sent from my iPhone using Tapatalk Pro
- TexasArmor84
- Senior Shotgunner
- Posts: 297
- Joined: Tue Dec 10, 2013 7:52 pm
Re: 870 magnum
I forgot but purchased it for $150 called Remington and it’s a 1986 modelTexasArmor84 wrote:Looking into buying this 870 magnum owner says maybe 20 years old. Does anyone know what model it actually is wingmaster?
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
-
- Shotgunner
- Posts: 16
- Joined: Sun Dec 31, 2017 12:21 am
Re: 870 magnum
Rem chokes were introduced in 1987
Sometime in the early 90's the rkw finish was changed along with the fluer de lis checkering pattern so I would say without the set # 1987-91
A quick call to Remington with the set # and they will tell you yr and month
Sometime in the early 90's the rkw finish was changed along with the fluer de lis checkering pattern so I would say without the set # 1987-91
A quick call to Remington with the set # and they will tell you yr and month
Re: 870 magnum
My 870 Magnum was made in '89 according to Remington.
Though mine had different wood and a 20" cylinder barrel.
I truly believe that mine was a police gun at one time.
The blueing on mine had a ton of wear on it. I would've called it about 65% if I were rating it to sell. Combined with the barrel type I know it wasn't used for hunting for the amount of wear of the finish. And the corncob forend.
I believe that the one that you're showing would've been sold as a wingmaster. Those stocks alone command a premium. You'd be hard pressed to just buy the stock and handguard on ebay for $150.
For $150 for the whole gun, you got the deal of the year.
Though mine had different wood and a 20" cylinder barrel.
I truly believe that mine was a police gun at one time.
The blueing on mine had a ton of wear on it. I would've called it about 65% if I were rating it to sell. Combined with the barrel type I know it wasn't used for hunting for the amount of wear of the finish. And the corncob forend.
I believe that the one that you're showing would've been sold as a wingmaster. Those stocks alone command a premium. You'd be hard pressed to just buy the stock and handguard on ebay for $150.
For $150 for the whole gun, you got the deal of the year.
When people ignorant of guns make gun laws, you have ignorant gun laws.
-John A.
-John A.