Pictures of your Remington 870 Shotgun

[hector.jacob]

bought in 2007
started with a synthetic stock, bought an used wood stock on ebay, finished it with raw linseed oil + some marine varnish

my remington 870 3" magnum
duracoat with durablue
hiviz shotgun sight
wilson combat 2 shot vertical magazine extension kit (follower + magazine spring)
tanks HD magazine/barrel clamp
wilson combat jumbo head safety
870 non mim extractor
1100 carrier dog follower spring ( carrier latch)
limbsaver airtech recoil pad

[Bourget117]

870.jpg

My Utilitarian 870 Police Magnum

Hogue 12" LOP Stock
Scattergun Tritium GRS
First Gen Surefire Forend
Nordic Comp +1 ext with Ext Spring
Progressive Creations Aluminum Low Drag Follower
Raven Concealment/Ares Gear Shot Shell System

Is that shell holder Velcro and double sided tape on the stock? If it is, I like that idea.

[Bourget117]

bought in 2007
started with a synthetic stock, bought an used wood stock on ebay, finished it with raw linseed oil + some marine varnish

my remington 870 3" magnum
duracoat with durablue
hiviz shotgun sight
wilson combat 2 shot vertical magazine extension kit (follower + magazine spring)
tanks HD magazine/barrel clamp
wilson combat jumbo head safety
870 non mim extractor
1100 carrier dog follower spring ( carrier latch)
limbsaver airtech recoil pad

Very nice.
How does that hi viz sight attach to the front?

[hector.jacob]

hi Bourget117

that mod was done by an armorer , he removed the pressed bed sight, then soldered and filed the hole, and tapped it to 6-48...

[Bourget117]

hi Bourget117

that mod was done by an armorer , he removed the pressed bed sight, then soldered and filed the hole, and tapped it to 6-48...

I like it and it looks good but I don't want to go through the time and expense of going to a gunsmith. I'm thinking about the XS Big Dot front held with epoxy.

[stfank]

Remington 870 tactical bought 2 years ago. I've only changed the front sight for a optic fiber.

And the last one, Remington 870 Wingmaster Police(not sure i am waiting for informations from Remington). But i won't change anything, it looks really nice like this.

Envoyé de mon SM-G388F en utilisant Tapatalk

[BigTime]

870 Police #24899

[AndyinEverson]

DSC06606.jpg (300.7 KiB) Viewed 14503 times

So first post ... first gun I've owned.
It is my 870 given to me by my Granddad many years ago.
1962 .20 gauge with a 28 inch barrel and modified choke.

It has taken many a squirrel , rabbit , grouse and clay bird.
I always look forward to taking it afield during hunting season.
Thanks for looking!
Andy

[filthy phil]

I have another coming this week. Supposedly an 18". I also have a +3 coming I bought off glocktalk.
If both the above are accurate I will put this +2 on the 18" and put the +3 on this one.

[safetyfast]

Started as a stock 870 with 28" barrel and black synthetic stocks. Added a 21" barrel, the Shurshot stocks, drilled and tapped receiver and added red dot sight.


Sent from my iPhone using Tapatalk