MME Shot Shell Caddy's 4 Shot

Official forum of S&J Hardware. Discussions, News and Announcements.

Moderator: S&J Forum Moderator

Post Reply
badboybeeson
Moderator of the S&J Hardware Forum
Posts: 186
Joined: Sun Jan 22, 2012 11:20 pm

MME Shot Shell Caddy's 4 Shot

Post by badboybeeson » Tue Apr 16, 2013 10:55 am

we are now a supplier for these fine shotshell carriers.
we have sold just about every brand of shell carriers, and these are be the best i have seen, ultra light and 20mm shorted then an other on the market, lighter then the plastic CCW brand

http://sjhardware.com/store/modules.php ... 1b8d1ac23f

MME Shot Shell Caddy's allow you to reliably draw 4 shells at a time with your fingers & thumb completely around the shells. NO more fumbling and grasping 2,3 or whatever shells you have left. This gives you the ability to setup your reloads perfectly allowing you to setup caddys designated for slugs, bird, buck whatever the need may be. The Caddy's are extremely streamlined at the minimum width so several Caddy's take up less belt space. The stainless steel belt loops prevent the Caddy's from falling off your belt or beiing pulled off. The minimum belt clip width also allows maximum velcro contact on your inner/out belt to prevent movement. The belt clips will accomodate a belt width up to 1.75" and a thickness of up to 3/8". ( Caddy's will work perfectly with most standard belts, cr speed, safariland etc.) Law Enforcement clips are also available for belts up to 2.25" wide. Also available for Safatiland ELS System.

Spring wires lock in the shells to ensure no dropped shells, spring tension can be adjusted by slightly bending spring in or out with small screw driver

All MME Caddy's come assembled for left hand loading. Caddy's may easily be changed to right hand loading by moving 10-32 screw on bottom of Caddy to other threaded hole and adjusting spring wires to shells which will now be facing the opposite direction.

Anodized aluminum available in several colors which helps. Differentiate slugs, from bird shot, from buck shot by sight.
The sring wires can be bent to adjust for tension.
Shell caddy is cut away so you can get your finger tips and thumb around the shells. Which means less fumbled reloads.
Button head screw to adjust the height to offset for the shot shell rim.
Caddy attaches to the belt with slim stainless steel belt loops. Providing more surface area for 2 belt systems such as the CR Speed High Torque belt to stay attached, eliminates belt sag.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest