EOTech IFL for Remington 870 Issues?

Tactical, combat, military, law enforcement and home defense use of a Remington 870 shotgun.
Post Reply
tjmorales
New Shotgunner
Posts: 9
Joined: Wed Jun 20, 2012 2:39 am

EOTech IFL for Remington 870 Issues?

Post by tjmorales » Wed Sep 26, 2012 4:08 pm

Hello Everyone, I recently installed an EOtech IFL for my Remington 870. Installation is easy, ergonomics, function, and overall feel was great. When i tested it on the range a couple of issues. With Buckshot and Slugs my index finger knuckle hurts like hell after 2 shots I think its because of the curved plastic lip on the EOtech IFL. Maybe I'm not holding it correct? I asked a couple of friends to try it and they said the same thing. No reviews yet on this hence the post. BTW, the Mossberg Model does not have that curved lip PLEASE BE AWARE When buying online since most use the Mossberg photos for both models.

User avatar
Vitaly
Owner
Posts: 1209
Joined: Tue Jan 03, 2012 11:27 am

Re: EOTech IFL for Remington 870 Issues?

Post by Vitaly » Fri Nov 16, 2012 12:38 pm

tjmorales, any news about this? Was the problem solved or persists?
http://www.Rem870.com - Blog about the Remington 870 Shotgun

DaveC
Addict Shotgunner
Posts: 306
Joined: Fri Dec 14, 2012 1:53 pm

Re: EOTech IFL for Remington 870 Issues?

Post by DaveC » Fri Dec 14, 2012 2:42 pm

Thanks for the tip Mr. TJMorales. I'll have to watch that when I take my old Rem 870 Express with the new IFL installed out for testing. Elsewhere on Mr. Pedchenko's blog I left my initial assessment of the EOTech IFL I just got:

I just installed the EOTech IFL forend on my Remington 870. It looks much, much more like the forend on the Remington “MCS” or “Modular Combat Shotgun” with a front hand-stop than the device in the photo, which must be the version for the Mossberg 500/590 shotguns.

I’m a long-time reader and “lurker” of the Remington 870 blog–as a Remington 870 owner, but this is my first post. I got a 12-gauge Remington 870 Express synthetic shotgun as a birthday gift over two decades ago. Sometime in the early 1990s. I modified it for home defense use. Initially, I had a six-shell Tac-star side-saddle, and a pistol-grip stock with a youth sized length-of-pull installed. The forend that came on the Remington 870 Express would not work with the side-saddle, and after watching my wife short-stoke pump-action shotguns, I decided to copy the stock furniture of the Mossberg Home Defense .410 and put a vertical fore-grip on the shotgun, thinking this might aid that problem, avoid “pinching” the left hand between the forend and the receiver, and absorbing recoil and controlling the shotgun. I had a really early first-generation weapon light mounted on the left side that could be operated by my thumb or forefinger attached with a simple metal bracket.

I have taken two defensive shotgun classes with this set up. It was not long that I decided to do away with the six-shot side-saddle, which lost screws during the class from repeated recoil, with a four-shell version. To me, this helps with balance. My 870 shotgun retains the factory-standard 4-shell tube magazine. Mine has the annoying dimples, and I did not trust myself to drill them out with a drill bit and so on. After a while, I decided that the 4+1 capacity was OK for weight and bringing the shotgun up from low-ready, or while using my free hand to operated door knobs or whatever while keeping the shotgun shouldered.

I just installed the EOTech IFL [www.L-3com.com/EOTech] forend. Some folks may not like the ergonomics, because while it really fills my hand, the shape is lower from the tube magazine than simpler “corn cob” forends that some shotgunners favor. It has deep grooves on the underside, but the texture is not as “pebbly” as one might think. The light is very simple, although racking the slide forcefully with the lockout switch on the “off” position leaves the finger pads “springy” which can be a little disconcerting initially. The light is bright, and it gives much better illumination than the light it replaced. I know there are some brighter lights, but for me as a civilian who lives in a small urban house, it is more than adequate, and I can light up a whole room quite well by pointing at a corner of a room, or through an aperture like a doorway. If I was a law enforcement officer or had to search spaces larger in size than a typical apartment or house, I might want a brighter light. I do like the streamlined “integrated” light to the Surefire version, and also to the unit that it replaced, which stuck out to the left. For those with NFA short shotgun barrels, say “entry” barrels of 14 inches or so, the front hand-stop on the IFL Rem. 870 may be welcome.

Installation was easy, even for someone like me. I worried I’d have to take it into a gun-smith for help in installation, but the provided tool and battery are really easy to put it all together with. I have not test-fired it yet, and I should post pictures of it for everyone to see, but so far I think it is a useful piece of equipment that improves the handling of my defensive shotgun. If I had to “do it over” I’d probably have opted for a Remington 870 Tactical in 20-gauge with a 7+1 capacity, but for “building my own” out of a shotgun that I already had, and using much, much more common 12-gauge shells with a wider variety of loadings [00 buck, 00 low-recoil buck, No.1 buck, No.4 buck, slugs every now and then] this EOTech aftermarket forend was a very useful upgrade.

Thanks/спасібо.
Alle Kunst ist umsonst, wenn ein Engel in das Zündloch prunst.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest