Laminated stock bolt lenght?

Discuss all accessories and upgrades available for the Remington 870 shotgun: stocks, forends, barrels, chokes, magazine extensions, followers, safeties, sights etc.
Post Reply
plexi
Newbie
Posts: 2
Joined: Sat Jun 27, 2020 3:41 pm

Laminated stock bolt lenght?

Post by plexi » Sat Jun 27, 2020 3:44 pm

Hi guys, I have just bought Remington original plywood (laminated) stock for my 870 and seems that the stock bolt length from my wooden stock is not enough. Could you please advise what is the needed length of stock bolt for laminated stock?
Mine is like on the picture below:
Image

User avatar
Scorpion8
Mentor Shotgunner
Posts: 877
Joined: Wed Nov 29, 2017 7:17 pm
Location: SE-AK

Re: Laminated stock bolt lenght?

Post by Scorpion8 » Sun Jun 28, 2020 4:36 am

Have you held them up side-by-side and compared?
Retired USN
NRA Life ; NAHC Life
Pain heals, chicks dig scars.....glory -- lasts forever!

plexi
Newbie
Posts: 2
Joined: Sat Jun 27, 2020 3:41 pm

Re: Laminated stock bolt lenght?

Post by plexi » Sun Jun 28, 2020 6:40 am

Have you held them up side-by-side and compared?
Stocks are externally the same. The only difference is, i don't know the right term, the depth of the wide part of opening for the bolt itself. The wooden one is two-three inches deeper. I haven't measured my bolt, but seems I have 8-1/2.
The length of narrow part of the bolt opening in plywood stock is 275mm:
Image

BKinzey
Active Shotgunner
Posts: 75
Joined: Fri Mar 27, 2020 6:57 pm

Re: Laminated stock bolt lenght?

Post by BKinzey » Mon Jun 29, 2020 2:16 am

There are 2 bolt lengths and 10.5" is the other one AFAIK.

User avatar
Scorpion8
Mentor Shotgunner
Posts: 877
Joined: Wed Nov 29, 2017 7:17 pm
Location: SE-AK

Re: Laminated stock bolt lenght?

Post by Scorpion8 » Mon Jun 29, 2020 3:02 pm

BKinzey wrote:
Mon Jun 29, 2020 2:16 am
There are 2 bolt lengths and 10.5" is the other one AFAIK.
That sounds right to me. Remington's website should offer more of a clue, because I think there were only two options.
Retired USN
NRA Life ; NAHC Life
Pain heals, chicks dig scars.....glory -- lasts forever!

Germansheperd
Senior Shotgunner
Posts: 245
Joined: Sat Nov 24, 2018 2:42 pm

Re: Laminated stock bolt lenght?

Post by Germansheperd » Wed Jul 01, 2020 12:06 pm

There are only 2 bolt options: 8.5” and 10.5”

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest