old kit extension magazine +1 manufacture remington

Discuss all accessories and upgrades available for the Remington 870 shotgun: stocks, forends, barrels, chokes, magazine extensions, followers, safeties, sights etc.
Post Reply
gipsysoundclash
New Shotgunner
Posts: 13
Joined: Sun Nov 03, 2019 3:49 pm

old kit extension magazine +1 manufacture remington

Post by gipsysoundclash » Sun Nov 03, 2019 4:01 pm

Hello everyone.
I need your knowledge! I can't find anything on the web; do you know that there was in the 70s/80s a tube magazine extension remington manufacture of a cartridge only? Have a nice weekend
Attachments
IMG_20191103_165229.jpg
IMG_20191103_165229.jpg (1.39 MiB) Viewed 859 times

Germansheperd
Senior Shotgunner
Posts: 230
Joined: Sat Nov 24, 2018 2:42 pm

Re: old kit extension magazine +1 manufacture remington

Post by Germansheperd » Sun Nov 03, 2019 9:02 pm

Is your question where to find a +1 extension? If that is what your after Wilson Combat sells a +1 for $45.

gipsysoundclash
New Shotgunner
Posts: 13
Joined: Sun Nov 03, 2019 3:49 pm

Re: vieux magazine d'extension de kit '1 fabrication remington

Post by gipsysoundclash » Sun Nov 03, 2019 9:59 pm

Hello,the above extension is different from +2. the stop is shorter, I can load 5 cartridge in 70mm. My question is know this is a kit extension +1 tube. Can be in the 70's remington manufactured? it's a mystery!

User avatar
Scorpion8
Veteran Shotgunner
Posts: 727
Joined: Wed Nov 29, 2017 7:17 pm
Location: SE-AK

Re: vieux magazine d'extension de kit '1 fabrication remington

Post by Scorpion8 » Mon Nov 04, 2019 2:58 am

gipsysoundclash wrote:
Sun Nov 03, 2019 9:59 pm
Hello,the above extension is different from +2. the stop is shorter, I can load 5 cartridge in 70mm. My question is know this is a kit extension +1 tube. Can be in the 70's remington manufactured? it's a mystery!
Offhand that looks like a +2 extension. Did you pull the spring, magazine follower and spring retainer to see if there is something blocking +2 and limiting you to +1? Some magazine followers have "tails" that may be long enough to just inhibit a full +2.
Retired USN
NRA Life ; NAHC Life
Pain heals, chicks dig scars.....glory -- lasts forever!

Germansheperd
Senior Shotgunner
Posts: 230
Joined: Sat Nov 24, 2018 2:42 pm

Re: old kit extension magazine +1 manufacture remington

Post by Germansheperd » Mon Nov 04, 2019 11:42 am

Scorpion8 is correct that is a +2. Something is hanging up and/or jamming. Remington +2’s are all the same from the 1960’s to the current day the only thing that changed is the barrel clamp in 1990 and you can tell because the 90+ have an ‘X’ stamped on the and the ‘89 and earlier don’t.
Make sure you use the right clamp on the right barrel.

gipsysoundclash
New Shotgunner
Posts: 13
Joined: Sun Nov 03, 2019 3:49 pm

Re: old kit extension magazine +1 manufacture remington

Post by gipsysoundclash » Mon Nov 04, 2019 11:44 am

hello yes I checked everything several times. I am not not enough space to retrieve the 6th cartridge the Bute followers on the follower stopping. besides that d i compare my trailing stop with extension +2 remington, it appears that my trailing stop is positioned much more short! What do you think ?

gipsysoundclash
New Shotgunner
Posts: 13
Joined: Sun Nov 03, 2019 3:49 pm

Re: old kit extension magazine +1 manufacture remington

Post by gipsysoundclash » Mon Nov 04, 2019 11:55 am

IMG_20191104_141116.jpg
IMG_20191104_141116.jpg (1.48 MiB) Viewed 840 times
there is not much left to introduce the sixth cartridge! maybe my 2 3/4" - 12/70 cartridges are too long? they are 1.9685 inches.

gipsysoundclash
New Shotgunner
Posts: 13
Joined: Sun Nov 03, 2019 3:49 pm

Re: old kit extension magazine +1 manufacture remington

Post by gipsysoundclash » Mon Nov 04, 2019 3:49 pm

gipsysoundclash wrote:
Mon Nov 04, 2019 11:55 am
IMG_20191104_141116.jpgthere is not much left to introduce the sixth cartridge! maybe my 2 3/4" - 12/70 cartridges are too long? they are 1.9685 inches.

gipsysoundclash
New Shotgunner
Posts: 13
Joined: Sun Nov 03, 2019 3:49 pm

Re: old kit extension magazine +1 manufacture remington

Post by gipsysoundclash » Mon Nov 04, 2019 10:55 pm

hey good evening guys!

give me you're feedback between my extension remington magazine between a another picture with kit remington factory extension tube magazine +2.
it's not a same piece accessory!
>> my Follower stop is more ready mag plug. I do not understand I can not find anything comparable identical on the web.

I removed the spring and introduced 6 cartridge + the follower and I reached the end of stop helps to prevent spring over-compression.
sorry for my vocabulary and grammar.
sportily

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests