20" barrel datecode issue

General discussion about Remington 870 shotgun.
Post Reply
24rocket
Newbie
Posts: 3
Joined: Fri Sep 21, 2018 10:55 am
Location: Port Huron, michigan

20" barrel datecode issue

Post by 24rocket » Fri Sep 21, 2018 11:14 am

870 PM.png
possibly a partial anchor ?
870 PM.png (976.58 KiB) Viewed 833 times
Can anyone help with this?

Sidney
Enthusiast Shotgunner
Posts: 37
Joined: Wed Sep 06, 2017 12:23 am
Location: Dartmouth, Nova Scotia, Canada

Re: 20" barrel datecode issue

Post by Sidney » Fri Sep 21, 2018 11:28 am

I assume that is the original barrel that came with that shotgun?, if not see if the barrel is made by Mossberg, Carlson and others. If it's the original barrel then contact Remington and give them the serial # of the gun, is it an Express (3" chamber, magnum) or Super Magnum Express (3.5" chamber)?.

24rocket
Newbie
Posts: 3
Joined: Fri Sep 21, 2018 10:55 am
Location: Port Huron, michigan

Re: 20" barrel datecode issue

Post by 24rocket » Fri Sep 21, 2018 1:41 pm

I don't know if its original to this gun. Story is LE trade in from Austin , Texas. It has a police magnum receiver, 20", and speedfeed hardware with ser# etched parallel with rubber speedfeed buttpad. Barrel says ok for 3" with magnum receiver. Has REP on right side of barrel with magnaflux mark.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest